Schluter KERDI-Band Waterproofing Strip – 5" Width, 98'5" Roll (KEBA100/125)

Schluter-KERDI-BAND (KEBA100/125) is a pliable waterproofing membrane strip designed to seal butt joints and floor-to-wall connections in tiled shower and bath installations. It is a 5" wide strip cut from the same polyethylene KERDI membrane material, covered in anchoring fleece on both sides for embedding in thin-set mortar. At 4 mil (0.1mm) thickness, it adds virtually no height beneath tile.

• Seals butt joints and floor-to-wall transitions in KERDI and DITRA shower systems
• Pliable sheet form — can be cut and shaped to fit any corner configuration, including inside and outside corners
• Covered in anchoring fleece on both sides for secure bonding in thin-set mortar
• Low water vapour permeance (vapour retardant) — suitable for steam rooms as well as showers
• 4 mil (0.1mm) thickness adds negligible height under tile
• Can also be used with KERDI-BOARD panels

Specifications:
Model: KEBA100/125
Width: 5" (125mm)
Roll length: 98' 5" (30m)
Thickness: 4 mil (0.1mm)
Material: Modified polyethylene (PEVA) with non-woven polypropylene fleece both sides